NEWS

Dolph Microwave’s double ridge waveguide components consist of 18 models that include WRD-84, WRD-650 and WRD-180 sizes, frequency range 0.84~40GHz. Product options include double ridge: Straight sections, bends, twist configurations, flexible waveguide Termination/load, coupler, fixed attenuator Magic T divider/combiner, rotating joint, bulkhead feed unit as well as a series of double ridge waveguide-to-coax adapters. In […]

The Ka-band OMT from Dolph Microwave is an Orthomode Transducer that operates within the frequency range of 17 to 31 GHz. With an isolation level of 35 dB, this OMT ensures minimal interference or leakage between its ports, providing a high level of isolation. Additionally, it boasts a return loss of 13.98 dB, indicating efficient

Oct. 26th, 2023 – Xi’an, SHAANXI – DOLPH-MW is an Specializing in the design and fabrication of high power microwave waveguide components. Compared with the 3-port “Y” type circulator, the 4-port differential phase shift circulator has a higher power tolerance and can meet the high power usage requirements of KW ~ MW. It has been

  Coaxial Rotary Joint     Coaxial rotary joints are mainly used in 360 ° continuous rotation and the waveguide signal cannot be interrupted: such as various military radars, shipborne satellite communication devices, vehicle-mounted satellite communication equipment, satellite vehicles, emergency disaster relief command vehicles, high-end robots, and vehicles. Rotating turrets, remote control systems, radar antennas,

Dolph Microwave specializes in custom design, production, and testing of various composite microwave customized waveguide assemblies. Rigid/Flexible double ridged E and H plane bending assemblies covering waveguide sizes WRD180 to WRD200. Bends, leg lengths and flange types are manufactured to customer specifications. VSWR is 1.15:1 over the entire waveguide band. Waveguide Specialized Bend Assemblies Waveguide

  In June 2018, Dolphmicrowave participated in the development and production of 48 antenna feeds for a major national project. Including S/X/Ka Tir-band, S/X, C/Ku Dual-band, Extended frequency band and other types of antenna feeds, which are used for 16 m 9 M 7.3 m aperture antenna. It is required to complete the factory acceptance

C-Band Pass Filter play an important role in microwave circuits. Working attenuation is usually used to describe the amplitude characteristics of the filter, which is divided into: low-pass, high-pass, band-pass and band-reject filters. The amplitude-frequency characteristics of the four basic types of filters are shown below. APPLICATIONS Rejects terrestrial interference in C-Band (5G, Radar and

  Low noise down-conversion module (LNB) in satellite receiving systems with limited frequency selection capability,   The signals in the range of 3.0-4.5 GHz shown in Fig. 1(a) are subjected to reception, amplification and down-conversion.   Figure 1 Frequency range of satellite and 5G carrier (a) Typical LNB, (b) Band-pass filter for isolating 5G signals

Dolph Microwave offers a full line of industrial microwave products. Specializing in 915 MHz  and 2450 MHz waveguide components, including launchers, isolators, directional couplers, tuners and loads. Operating frequency covers 915 MHz and 2450MHz, power up to 20kW CW, with our manufacturing and engineering capabilities we can also offer custom designed products. Call Dolph Microwave

5G network in the 3.4 to 4.0 GHz band is coming, causing interference in the satellite C-band receive spectrum 3.4 – 4.2 GHz. The latest version of Dolph 5G Interference Rejection Bandpass Filter, 3.7-4.2GHz, Rejection 70 dB @ f ≤ 3.6GHz, 70 [email protected] The customers in India, Indonesia and Brazil Satcom markets are using it