HOME » Waveguide, RF & Microwave Components » Waveguide Bends
Waveguide Bends
Double-ridged waveguide bends route a WRD transmission path around fixed mechanical constraints. E-plane and H-plane versions are available with 45°, 60° and 90° options, cover or grooved flanges and listed maximum VSWR of 1.25. Match the model band and both mating interfaces before defining the envelope.
Double Ridged Waveguide Bends
Dolph Microwave double-ridged waveguide bends change the direction of a WRD transmission path where a straight section will not fit. Choose an E-plane or H-plane bend from the port orientation and available space in the assembly drawing. A bend routes the path; use a waveguide twist when the required change is cross-section rotation.
The published range covers WRD84 through WRD180, with individual model frequency ranges from 0.84 GHz to 40.0 GHz. Available configurations include 45°, 60° and 90° bends, cover or grooved flanges, and multiple standard length options.
Technical Specifications
Double Ridged Waveguide Bend Model Range
Several models have overlapping frequency ranges, so match the WRD interface as well as the operating band. Select adjoining parts from the double-ridged waveguide range; similar-looking flanges are not proof of compatibility.
How to Select a Double Ridged Waveguide Bend
Confirm the WRD Interface
Begin with the WRD interface used by the adjoining waveguide components. Frequency overlap alone does not make different WRD sizes interchangeable.
Select the Bend Plane
The ordering information uses WEB for an E-plane bend and WHB for an H-plane bend.
Define the Bend Angle
Published bend options include 45°, 60° and 90°. The required direction and orientation should be shown on the assembly drawing.
Confirm Length and Flange
Listed length options include 45, 60, 90 and 100 mm. Specify the drawing dimensions and their reference planes rather than treating these values as a bend radius. Cover and grooved flanges are available; the flange fit guide identifies the dimensions needed to check the mating joint.
Materials and Surface Finishes
The published specification table lists Al / Brass as the material options. The inside finish is listed as Iridite per MIL-C-5541, while the external body finish is listed as anticorrosion black painted.
The MIL-C-5541 reference applies specifically to the stated Iridite finish and should not be presented as a broader qualification claim for the complete product.
Part Number Guide
Published ordering example: DH-650DR WEB_WHB 50*50 P M A
Dolph Microwave
WRD650
E-Bend, default 90°
H-Bend, default 90°
A*B dimensions in millimetres
Flange cover
Flange grooved
Material Al
Technical Downloads
Review the product datasheet for the model range and ordering information. Use the flange document to check available double-ridge flange drawings and dimensions.
Frequently Asked Questions
What frequency range is covered by the listed models?
The published model ranges begin at 0.84-2.0 GHz for WRD84 and extend to 18.0-40.0 GHz for WRD180.
What is the published maximum VSWR?
The specification table lists a maximum VSWR of 1.25 for the published models.
Are E-plane and H-plane bends available?
Yes. The ordering information uses WEB for an E-plane bend and WHB for an H-plane bend.
Which bend angles are listed?
The published bend options are 45°, 60° and 90°. The ordering example identifies 90° as the default WEB and WHB configuration.
Which flange types are available?
The published options include cover and grooved flange configurations.
What should be included in an RFQ?
Include the operating frequency range, WRD type, E-plane or H-plane configuration, bend angle, A*B dimensions, required length, flange type, material and quantity.
Request a Double Ridged Waveguide Bend Quote
Include the following information in your RFQ:
- Operating frequency range
- Required WRD waveguide type
- E-plane or H-plane configuration
- Required bend angle
- Required A*B dimensions
- Required length
- Cover or grooved flange
- Al or brass material
- Required quantity
- Mechanical drawing, where available
