The waveguide horn antenna is a directional antenna extended from a waveguide. Common models include X-band (8.2-12.4GHz), with a gain of 10-20dBi. The radiation efficiency is optimized by adjusting the horn angle and length, and it is widely used in radar and satellite communication systems. Basic Definition Microwave engineers know waveguide horn antennas are the […]
What is a waveguide horn antenna Read More »
The impedance of a rectangular waveguide is not a single value; it varies by mode and frequency. For the dominant TE10 mode, the wave impedance is approximately 377 Ω (η) multiplied by the ratio of the guide wavelength to the free-space wavelength. What Is Waveguide Impedance? Waveguide impedance isn’t some abstract idea—it’s a measured value
What is the impedance of a rectangular waveguide wave Read More »
For optimal performance, place the antenna booster as high and as close to the main antenna as possible, ideally within 1-2 meters, to minimize signal loss in the cable and maximize line-of-sight to the signal source. Near the Window First Studies show that 70% of indoor signal loss happens because of walls and obstacles—glass lets
Where should an antenna booster be placed Read More »
The gain of horn antennas is usually less than 20 dBi, with weak directivity, and is suitable for microwave communications and measurements. Its performance is limited by the size of the aperture, and it is difficult to achieve high-precision processing of large antennas, which affects the radiation efficiency and beam control capabilities. Volume Issues Every
What are the limitations of horn antenna Read More »
The TIA-568 standard primarily specifies balanced twisted-pair cables (Category 5e/6/6A/8 for 1G-40G Ethernet) and optical fiber cables (OM1-5 multimode and OS1-2 single-mode for various distances and speeds). What TIA 568 Actually Covers TIA-568 (latest version: TIA-568.2-D, 2021) defines how to design, install, and test copper and fiber optic cabling systems for commercial buildings. It’s not
What cable types are included in the TIA 568 structured cabling standards Read More »
Waveguide to coaxial conversion adapter is used to connect waveguide and coaxial cables. Typical parameters are frequency range 1-18GHz, interface type N-type or SMA. Ensure good matching during operation to reduce reflection loss. It is often used in microwave test equipment. Adapter Definition At 3AM, ESA mission control received ChinaSat 9B alerts – its WR-42
What is a waveguide to Coax adapter Read More »
A rotary coupling, or joint, transmits signals or power between stationary and rotating parts. It uses precisely aligned waveguide channels or coaxial rings to maintain a continuous electrical path, often handling high power (e.g., 10 kW) at frequencies like 10 GHz, with minimal signal loss (<0.5 dB) and VSWR below 1.5:1. What is a Rotary
How does a rotary coupling work Read More »
The waveguide-to-coax transition enables efficient signal transfer between high-frequency waveguides (e.g., operating at 10–100 GHz) and coaxial cables, typically using a probe or loop within the waveguide to couple energy into the center conductor, achieving VSWR < 1.2 with precise alignment and machined metal interfaces for minimal loss. What’s a Waveguide? A waveguide is a
What is the purpose of the waveguide to coax transition Read More »
Antenna supporting structures must comply with structural standards like TIA-222 which specifies design loads for wind (up to 150 mph), ice, and seismic zones, requiring galvanized steel and precise foundation anchoring to ensure stability and alignment. Key Design Loads Explained When designing an antenna support structure, the primary goal is to ensure it can withstand
What is the structural standard for antenna supporting structures Read More »
Starlink user terminals primarily operate in the Ku-band (12-18 GHz) for downlink and Ka-band (27-40 GHz) for uplink, with a typical default downlink frequency around 12.5 GHz for standard internet data transmission to the dish. Starlink’s Basic GHz Speed The default GHz range for Starlink is primarily 10.7–12.7 GHz (Ku-band) and 17.8–18.6 GHz / 18.8–19.3
What is the default GHz for Starlink Read More »
Dolph Microwave warrants our products to be free from defective material and workmanship for a period of one year from the date of delivery. All defective parts will be replaced and repair work required by normal use will be performed, without charge, within this one year period. This warranty shall be exclusive and in lieu of all other warranties expressed or implied.
FengHuiNan Road NO.34, High-Tech Zone, Xi an, China
Tel/Fax: (+86) 29-8881-0979
E-mail: [email protected]