Author name: Dolph

[Waveguide Dual-Channel Rotary Joint] WR28 Dual-Channel Rotary Joint for Ka-Band SOTM Systems

[Waveguide Dual-Channel Rotary Joint ]WR28 Dual-Channel Rotary Joint for Ka-Band SOTM Systems

To address Ka-Band satellite-on-the-move (SOTM) requirements, Dolph Microwave has added WR28 Dual-Channel Rotary Joint model DH-320WRJUIPMA to its family of microwave rotary joints. This miniature dual-channel device features a high-power transmit channel implemented in a right-angle WR28 waveguide on the fixed (input) side and a female K-type coaxial connector on the rotating (output) side, while […]

[Waveguide Dual-Channel Rotary Joint ]WR28 Dual-Channel Rotary Joint for Ka-Band SOTM Systems Read More »

[Waveguide Flange Shim] WR340 Waveguide Flange Shim Production and processing

[Waveguide Flange Shim] WR340 Waveguide Flange Shim Production and processing

Dolph Microwave manufactures a series of high-performance Waveguide Flange Shim, applying to a rectangular waveguide type, flat rectangular, moderately flat rectangle, square,round, single ridged and double ridged standard type, etc. The frequency range is from 0.3 to 110 GHz. The standard rectangular waveguide range from BJ3 to BJ900, the typical VSWR is 1.03 over the

[Waveguide Flange Shim] WR340 Waveguide Flange Shim Production and processing Read More »

[WRD-650 Double Ridge Waveguide Magic Tees & Hybrids], 6.5 GHz to 18 GHz Frequency Band, 3.1±0.5 dB Distribution Ratio,

[WRD-650 Double Ridge Waveguide Magic Tees & Hybrids], 6.5 GHz to 18 GHz Frequency Band, 3.1±0.5 dB Distribution Ratio, ≥30dB H/E Arms Isolation.

Dolph Microwave has developed a line of four port double ridge waveguide magic tees & hybrids power combiners and dividers covering waveguide sizes WRD-200 to WRD-700. These Magic Tees & Hybrids can vectorially add, subtract or divide two signals. E-plane to H-plane Isolation is a function of the symmetry which is carefully balanced on each

[WRD-650 Double Ridge Waveguide Magic Tees & Hybrids], 6.5 GHz to 18 GHz Frequency Band, 3.1±0.5 dB Distribution Ratio, ≥30dB H/E Arms Isolation. Read More »

[Dual Channel Rotary Joint] WR284 Waveguide Dual Channel Rotary Joint for High Handling Power, with CW 15 KW, High Lifea

[Dual Channel Rotary Joint] WR284 Waveguide Dual Channel Rotary Joint for High Handling Power, with CW 15 KW, High Lifeatime >5 x 10⁶ revolutions

Dual channel rotary joint are used to transmit microwave energy from stationary lines to rotating lines. Dolph Microwave offers a standard product line of Rotary Joints covering waveguide sizes WR28 thru WR284.Rotary Joints (rotary couplers) are used to transmit microwave energy from stationary lines to rotating lines. Available styles are defined by physical geometry as

[Dual Channel Rotary Joint] WR284 Waveguide Dual Channel Rotary Joint for High Handling Power, with CW 15 KW, High Lifeatime >5 x 10⁶ revolutions Read More »

[Launcher and Tapered Waveguide] for LG MAGETRON 2M290

[Launcher and Tapered Waveguide] for LG MAGETRON 2M290

Launcher and Tapered Waveguide for 3kw microwave magnetron for LG MAGETRON 2M290   Model: DH-2226WA150PPA+DH-26MECL100A10 Frequency Range: 2450±50 MHz VSWR (Max.): ≤1.05:1 Handling Power: 3 KW, CW Waveguide Type: WR340/WR430 Flange: FDP26/FDP22 Material: Aluminum Inside Finish: Chromate conversion / Silver plating Outside Finish: Anticorrosion black paint Any interested items, please contact.  

[Launcher and Tapered Waveguide] for LG MAGETRON 2M290 Read More »

[WG Mode Converter/Antenna] WR340 Mode Converter/Antenna for Microwave Plasma CVD Application

[WG Mode Converter/Antenna] WR340 Mode Converter/Antenna for Microwave Plasma CVD Application

If you have a microwave source of 2.45GHz, want to concentrate microwave energy in a chamber using Antenna. Then WR340 WG Mode Converter/Antenna must be what you need. WR340 WG Mode Converter/Antenna for microwave plasma CVD application. Model:DH-26WGMCTE10/TM01 (WR340) Frequency Range:2450±50 MHz VSWR (Max.):≤1.2:1 Handling Power:6 KW, CW Mode Converter:TE10-TM01 Water Flow:3-5 L/min Waveguide Type:WR340

[WG Mode Converter/Antenna] WR340 Mode Converter/Antenna for Microwave Plasma CVD Application Read More »

[In Stock WR75 Flexible Waveguide]

[In Stock WR75 Flexible Waveguide]

The stock WR75 flexible waveguide is 90cm and can be shipped within 48 hours. Flexible and twistable rectangular waveguides are used in a wide variety of satcom, VSAT and telecom applications that carry high frequency radio (microwave communications) signals. Specifications are as follows: Model: DH-120WEL900PMC(WR75) Freq. Range: 10.0-15.0 GHz VSWR: ≤1.15:1 Insertion Loss: 0.55 dB/m

[In Stock WR75 Flexible Waveguide] Read More »

【Waveguide to Coaxial Adapters】Low Cost and High Performance for Laboratory are Both Available from WR-2300 to WR-10

【Waveguide to Coaxial Adapters】Low Cost and High Performance for Laboratory are Both Available from WR-2300 to WR-10

Dolph Microwave manufactures Right Angle / End-launch Waveguide to Coaxial Adapters covering a full frequency range for Rectangular Waveguides, with multiple flange and coaxial connector types and configurations available. Full waveguide bands available from 0.32 GHz(WR2300) to 112 GHz(WR10). Low insertion losses and VSWR’s are typical for these waveguide to coax adapters. Laboratory grades are

【Waveguide to Coaxial Adapters】Low Cost and High Performance for Laboratory are Both Available from WR-2300 to WR-10 Read More »

【Single-polarized Slotted Waveguide Array Antenna Manufacturer | Dolph Microwave】X-band Weather Radar Slotted Waveguide

【Single-polarized Slotted Waveguide Array Antenna Manufacturer | Dolph Microwave】X-band Weather Radar Slotted Waveguide Array Antenna

The narrow-side oblique slit traveling slotted waveguide array antenna is designed to suppress cross-polarization through the dual design of choke groove and polarization grid. The product has the characteristics of high gain, low sidelobe, wide scanning angle and low cross-polarization. DH-SWRAX04-64-LPS-SMA is a weather resistant X-band slotted waveguide array antenna that operates from 8.2 to

【Single-polarized Slotted Waveguide Array Antenna Manufacturer | Dolph Microwave】X-band Weather Radar Slotted Waveguide Array Antenna Read More »

【Waveguide to Waveguide Transitions】Waveguide sizes from WR-2300 to WR-12.

【Waveguide to Waveguide Transitions】Waveguide sizes from WR-2300 to WR-12.

Dolph Microwave manufactures a wide variety of standard rectangular to rectangular, and rectangular to circular waveguide transitions in overlapping bands to custom transitions spanning multiple bands. STANDARD FEATURES Frequency range of 0.35 GHz to 91.9 GHz Maximum VSWR as low as 1.05:1. Maximum Length: 1000mm. Waveguide transition sizes range from WR-2300 (0.35 GHz) to WR-12

【Waveguide to Waveguide Transitions】Waveguide sizes from WR-2300 to WR-12. Read More »

Scroll to Top
Blank Form (#3)